Midi Control Help
Re: Midi Control Help
Try leaving the 'Status' to 0!
EXEC_SEND_MIDI_SHORTMSG 0xB0|0|${outputmixer1volume}
Note, that ${outputmixer1volume} references your 1st output mixer.
EXEC_SEND_MIDI_SHORTMSG 0xB0|0|${outputmixer1volume}
Note, that ${outputmixer1volume} references your 1st output mixer.
Bernd - radio42
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution
Re: Midi Control Help
If I summary :
EXEC_SEND_MIDI_SHORTMSG 0xB0|0|${CONDA}
(In Eventcommand / on fader for player 1)
(I'm sorry to disturb you as I really try to understand your system.)
EXEC_SEND_MIDI_SHORTMSG 0xB0|0|${CONDA}
(In Eventcommand / on fader for player 1)
(I'm sorry to disturb you as I really try to understand your system.)
Re: Midi Control Help
Yes I discover
I just want my BCF fader move when the fader ProppFrexx (Mixer output) and touch the software.
Because the problem is that I put an autostart on faders and if it is not down to his problem arises after the song.
I just want my BCF fader move when the fader ProppFrexx (Mixer output) and touch the software.
Because the problem is that I put an autostart on faders and if it is not down to his problem arises after the song.
Re: Midi Control Help
And what event are you using?
Are you using the events commands when you right-click on the mixer-channel name and then select "Edit Control Commands Events..." and then select the 'OnFader' entry?
And then please try the following command:
EXEC_SEND_MIDI_SHORTMSG 0xB0|0|0x51|${outputmixer1volume}
Are you using the events commands when you right-click on the mixer-channel name and then select "Edit Control Commands Events..." and then select the 'OnFader' entry?
And then please try the following command:
EXEC_SEND_MIDI_SHORTMSG 0xB0|0|0x51|${outputmixer1volume}
Bernd - radio42
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution
Re: Midi Control Help
Maybe this helps:
http://www.behringer.com/assets/BCF2000 ... 0_M_FR.pdf
http://www.behringer.com/assets/BCF2000 ... 0_M_FR.pdf
Bernd - radio42
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution
Re: Midi Control Help
I guess there is not much to understand within ProppFrexx, but more in general I guess
A midi short message typically has got 3-bytes:
1. byte: status and channel
2. byte: data1
3. byte: data2
As such the EXEC_SEND_MIDI_SHORTMSG let's you exactly compose the midi short message like that.
The 'only' thing you need to know is what your midi controller expects/accepts - but this is out of my scope as each controller uses its own...that's why I pointed you to the controllers manual.
However: What do you want to do?
Please describe this detail...
A midi short message typically has got 3-bytes:
1. byte: status and channel
2. byte: data1
3. byte: data2
As such the EXEC_SEND_MIDI_SHORTMSG let's you exactly compose the midi short message like that.
The 'only' thing you need to know is what your midi controller expects/accepts - but this is out of my scope as each controller uses its own...that's why I pointed you to the controllers manual.
However: What do you want to do?
Please describe this detail...
Bernd - radio42
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution
Re: Midi Control Help
It looks like the Controller has a 'learn' function and you can define it yourself...?!
Bernd - radio42
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution
Re: Midi Control Help
Haaa it's great works
Thank you very much for your help!
Thank you very much for your help!