GPIO_Start_Vellemanserver
GPIO_Start_Vellemanserver
I have a problem with gpio_start_vellemanserver. If I turn on AutoPlay stops gpio velleman, but when I turn it back off, it does not return to the gpio start velleman. I have made a movie.
https://dl.dropboxusercontent.com/u/170 ... TOplay.mp4
https://dl.dropboxusercontent.com/u/170 ... TOplay.mp4
Re: GPIO_Start_Vellemanserver
Can you please enable the 'Debug Logging' option in the GPIO-Client application and then (after you tried it again) send me the Debug_ .log file of the ProppFrexx GPIOClient (its contained in the AppUserData folder of the ProppFrexx GPIOClient).
Bernd - radio42
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution
Re: GPIO_Start_Vellemanserver
Please
https://dl.dropboxusercontent.com/u/170 ... 161003.log
https://dl.dropboxusercontent.com/u/170 ... 161002.log
for yesterday en today some test
https://dl.dropboxusercontent.com/u/170 ... 161003.log
https://dl.dropboxusercontent.com/u/170 ... 161002.log
for yesterday en today some test
Re: GPIO_Start_Vellemanserver
Yes, there seems to be an issue in your case with starting the Velleman interface again.
I can not say why (as here for example it works fine) - but the log "DispatchCommand Reply: ERROR: unknown - command cannot be executed" indicates, that the start can not be executed.
Unfortunately I currently cannot say why in your case.
So I need to provide you with a newer version which logs a few more details to 'see' what exactly is failing in your case...
I'll let you know when a newer version is available to test with ...
I can not say why (as here for example it works fine) - but the log "DispatchCommand Reply: ERROR: unknown - command cannot be executed" indicates, that the start can not be executed.
Unfortunately I currently cannot say why in your case.
So I need to provide you with a newer version which logs a few more details to 'see' what exactly is failing in your case...
I'll let you know when a newer version is available to test with ...
Bernd - radio42
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution
Re: GPIO_Start_Vellemanserver
yes yes everything works as it should be. Thank you
Re: GPIO_Start_Vellemanserver
After some more investigation, I guess I have found the issue.
A new v4.0.1.66-beta (see "Check for Beta-Versions...", located under the blue question mark icon at the very top right) is available to test.
A new v4.0.1.66-beta (see "Check for Beta-Versions...", located under the blue question mark icon at the very top right) is available to test.
Bernd - radio42
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution