files D&R Airlite Mapping/Integration Example
files D&R Airlite Mapping/Integration Example
Hello,
Have problems set up D&r Airlite USB and Proppflexx, need help.
-airlite control up and running (usb connect at master)
-proppfrexx onair (laterst version) in demo mode
-GPIO client up and running
- airlite-config-preset: Load this preset at the airlite configuration manager = OK
- airlite.events: Load this events file at the general settings => Events/Commands
first export current event to backup file, then import the same file, results in an error! same with this preset file
- airlite.mixer: ProppFrexx Mixer and Routing for Airlite
Where load this mixer file?
- Default.drl: GPIO Remote Mapping for Airlite
Where load this file?
How is the Airlite configured with this sample?
Channel 1-3: Mic
Channel 4: Player A
Channel 5: Player B
Channel 6: Player C
Channel 7: Cartwall and PFL Player and Overlay Player
Channel 8: VoIP / Skype
First row of control buttons 1-8: Cartwall 1 (start / stop 1-8 entries)
Local soundcard: Monitor signal (same as PFL).
USB 1 Output (Main Out): In 1 at ProppFrexx. This channel has to selected for stream source. Hasn´t to be unmuted. (see page 19 of the airlite manual)
USB 3 Output (Voice Track signal): In 2 at ProppFrexx for voice tracking and pre recording your voice. (see page 19 of the airlite manual)
Installation:
1) Import all files at the right direction.
2) Check your mixer settings and add the correct usb channels of the airlite to your single in- and outputs.
3) Restart ProppFrexx.
I really appreciate any help you can provide
Have problems set up D&r Airlite USB and Proppflexx, need help.
-airlite control up and running (usb connect at master)
-proppfrexx onair (laterst version) in demo mode
-GPIO client up and running
- airlite-config-preset: Load this preset at the airlite configuration manager = OK
- airlite.events: Load this events file at the general settings => Events/Commands
first export current event to backup file, then import the same file, results in an error! same with this preset file
- airlite.mixer: ProppFrexx Mixer and Routing for Airlite
Where load this mixer file?
- Default.drl: GPIO Remote Mapping for Airlite
Where load this file?
How is the Airlite configured with this sample?
Channel 1-3: Mic
Channel 4: Player A
Channel 5: Player B
Channel 6: Player C
Channel 7: Cartwall and PFL Player and Overlay Player
Channel 8: VoIP / Skype
First row of control buttons 1-8: Cartwall 1 (start / stop 1-8 entries)
Local soundcard: Monitor signal (same as PFL).
USB 1 Output (Main Out): In 1 at ProppFrexx. This channel has to selected for stream source. Hasn´t to be unmuted. (see page 19 of the airlite manual)
USB 3 Output (Voice Track signal): In 2 at ProppFrexx for voice tracking and pre recording your voice. (see page 19 of the airlite manual)
Installation:
1) Import all files at the right direction.
2) Check your mixer settings and add the correct usb channels of the airlite to your single in- and outputs.
3) Restart ProppFrexx.
I really appreciate any help you can provide
Re: files D&R Airlite Mapping/Integration Example
Which airlite preset files are yountalking about.
I assume it might be a set of config files provided by a user?!
I assume it might be a set of config files provided by a user?!
Bernd - radio42
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution
-
- Posts: 86
- Joined: 03 Aug 2012 09:36
Re: files D&R Airlite Mapping/Integration Example
Hi,
I´ve created these files - what is exactly your problem? You have to place the files at C:\User\your-username\AppData\Roaming\radio42\...
dlr file need to be stored at C:\User\your-username\AppData\Roaming\radio42\ProppFrexx GPIO/4.0/
Try the new events export. I´ve updated the repository: https://github.com/benhartwich/proppfre ... ee/Airlite
Loading the mixer file: Place the file at C:\User\your-username\AppData\Roaming\radio42\ProppFrexx On Air/4.0 and you can load it within the settings sections at Input/Output
I´ve created these files - what is exactly your problem? You have to place the files at C:\User\your-username\AppData\Roaming\radio42\...
dlr file need to be stored at C:\User\your-username\AppData\Roaming\radio42\ProppFrexx GPIO/4.0/
Try the new events export. I´ve updated the repository: https://github.com/benhartwich/proppfre ... ee/Airlite
Loading the mixer file: Place the file at C:\User\your-username\AppData\Roaming\radio42\ProppFrexx On Air/4.0 and you can load it within the settings sections at Input/Output
Re: files D&R Airlite Mapping/Integration Example
thanks, I'm one step further now!
can't Load airlite.events file at the general settings => Events/Commands
=======================================================
29-11-2016 10:34:59 [v4.0.2.8]:********** Error/Exception Information **********
Error Message: Index was out of range. Must be non-negative and less than the size of the collection.
Parameter name: index
Error Type: System.ArgumentOutOfRangeException
Error Source: mscorlib.System.Object get_Item(Int32)
********** System Stack Trace **********
at System.Collections.ArrayList.get_Item(Int32 index)
at ProppFrexx.OptionDialog.lEH1(TreeListNode , Int32 , Profile , String , Int32& )
at ProppFrexx.OptionDialog.iEHN(Object , EventArgs )
at System.Windows.Forms.Control.OnClick(EventArgs e)
at DevExpress.XtraEditors.BaseButton.OnMouseUp(MouseEventArgs e)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at DevExpress.Utils.Controls.ControlBase.WndProc(Message& m)
at DevExpress.XtraEditors.BaseControl.WndProc(Message& msg)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
********** End **********
=========================================================
the faders starts en stops now but can't change the volume?
I still have a lot to find out
can't Load airlite.events file at the general settings => Events/Commands
=======================================================
29-11-2016 10:34:59 [v4.0.2.8]:********** Error/Exception Information **********
Error Message: Index was out of range. Must be non-negative and less than the size of the collection.
Parameter name: index
Error Type: System.ArgumentOutOfRangeException
Error Source: mscorlib.System.Object get_Item(Int32)
********** System Stack Trace **********
at System.Collections.ArrayList.get_Item(Int32 index)
at ProppFrexx.OptionDialog.lEH1(TreeListNode , Int32 , Profile , String , Int32& )
at ProppFrexx.OptionDialog.iEHN(Object , EventArgs )
at System.Windows.Forms.Control.OnClick(EventArgs e)
at DevExpress.XtraEditors.BaseButton.OnMouseUp(MouseEventArgs e)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at DevExpress.Utils.Controls.ControlBase.WndProc(Message& m)
at DevExpress.XtraEditors.BaseControl.WndProc(Message& msg)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
********** End **********
=========================================================
the faders starts en stops now but can't change the volume?
I still have a lot to find out
Re: files D&R Airlite Mapping/Integration Example
Hi,
that's indeed an error in the Event-Importer.
A fix is now available in the v4.0.2.9-beta (so please "Check for Beta-Versions...").
Sorry for the inconvenience.
that's indeed an error in the Event-Importer.
A fix is now available in the v4.0.2.9-beta (so please "Check for Beta-Versions...").
Sorry for the inconvenience.
Bernd - radio42
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution
Re: files D&R Airlite Mapping/Integration Example
thanks for the reply
I would like to change the volume with the faders, but can only start and stop the players?
I would like to change the volume with the faders, but can only start and stop the players?
Re: files D&R Airlite Mapping/Integration Example
The D&R Airlite does not allow this. Only an ON/OFF state is reported by the Airlite, but not any fader position!
However, this is also normally not needed, as the Airlite is a real mixer and not a console; meaning the fader position of the Airlite already changes the volume of the related channel.
If you would in addition also change the volume of a PF mixer channel in parallel; you would change the volume twice! This is normally not desired!
However, this is also normally not needed, as the Airlite is a real mixer and not a console; meaning the fader position of the Airlite already changes the volume of the related channel.
If you would in addition also change the volume of a PF mixer channel in parallel; you would change the volume twice! This is normally not desired!
Bernd - radio42
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution
Re: files D&R Airlite Mapping/Integration Example
there was a problem with USB in windows which Proppfrexx ONAIR not working properly, it has been resolved. The beta version v4.0.2.9 is unfortunately jammed a few times. v4.0.2.8 working stable
Re: files D&R Airlite Mapping/Integration Example
If PF 'jammed' there will be some entry in the file called 'Error.log' in the AppUserData folder.
Else it was probably your system which 'jammed'?!
Else it was probably your system which 'jammed'?!
Bernd - radio42
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution