Adjusting silence detection time

You have a question or need an advice about how to do something? Ask it here!
Post Reply
mixmog
Posts: 33
Joined: 06 Feb 2018 11:42
Adjusting silence detection time

Post by mixmog »

I am using silence detection on one output channel, on silence a command is sent to open an input fader, when sound returns, onnoise command closes the fader.

Silence detection occurs after 10 seconds and noise detection instantaneously. Where do I adjust the default settings for silence/noise detection? What I want to achieve is noise being present for several seconds before the onnoise command is sent.
User avatar
radio42
Site Admin
Posts: 8295
Joined: 05 Apr 2012 16:26
Location: Hamburg, Germany
Contact:
Re: Adjusting silence detection time

Post by radio42 »

You can find the Silence detection settings in the general settings, section Mixing/Fading.
However, you can only adjust the 'Silence for at least' time in seconds.
When noise is detected it will trigger the event always immediately.
mixmog
Posts: 33
Joined: 06 Feb 2018 11:42
Re: Adjusting silence detection time

Post by mixmog »

Many thanks - it would be useful to be able to adjust the noise detection time. I'll submit it to the wish list for consideration.

Post Reply