Re: Investigate Silent detection
Posted: 08 Jan 2019 09:08
Hi Bernd,
Thanks for your reply.
Herewith my feedback:
Mixerchannel Silence detection: -35 dB - Silence for at least 30 sec.
Condition: Only on scheduler, action: Auto play
Routing:
DJ player(s) Rout -> no sounddevice Virtual subbus 44,1 Khz (out2)
stand by -> no sounddevice Virtual subbus 44,1 Khz (out2)
Full duplex -> no sounddevice Virtual subbus 44,1 Khz (out2)
PFL -> no sounddevice Virtual subbus 44,1 Khz (out2)
Cartwall 1 + 2 -> no sounddevice Virtual subbus 44,1 Khz (out2)
Overlay -> no sounddevice Virtual subbus 44,1 Khz (out2)
Output device config:
ROUT
Samplerate 44,1 Khz
Driver model: None
Output mixer channel: out2 Wave out 2 (orban optimod)
Mute/unmute Output
Enable silence detection
OUT2
Output samplerate 48 Khz
Drivermodel: WDM
Wave out 2 (orban optimod)
Speakerpair: Default
Copy to: None
Output in 32 Bit
Apply master volume (checked on)
Enable silence detection
Cuepoints are automaticly done by de ACPD option, which i have chosen to be re-calc every time he loads a song / programm, etc.
The schedule is been setup as follow:
xx:59:40 Overlay player News starts
xx:02:30 soft start scheduler with early start of 70 sec, and late start of max 120 sec.
Thanks for your reply.
Herewith my feedback:
Mixerchannel Silence detection: -35 dB - Silence for at least 30 sec.
Condition: Only on scheduler, action: Auto play
Routing:
DJ player(s) Rout -> no sounddevice Virtual subbus 44,1 Khz (out2)
stand by -> no sounddevice Virtual subbus 44,1 Khz (out2)
Full duplex -> no sounddevice Virtual subbus 44,1 Khz (out2)
PFL -> no sounddevice Virtual subbus 44,1 Khz (out2)
Cartwall 1 + 2 -> no sounddevice Virtual subbus 44,1 Khz (out2)
Overlay -> no sounddevice Virtual subbus 44,1 Khz (out2)
Output device config:
ROUT
Samplerate 44,1 Khz
Driver model: None
Output mixer channel: out2 Wave out 2 (orban optimod)
Mute/unmute Output
Enable silence detection
OUT2
Output samplerate 48 Khz
Drivermodel: WDM
Wave out 2 (orban optimod)
Speakerpair: Default
Copy to: None
Output in 32 Bit
Apply master volume (checked on)
Enable silence detection
Cuepoints are automaticly done by de ACPD option, which i have chosen to be re-calc every time he loads a song / programm, etc.
The schedule is been setup as follow:
xx:59:40 Overlay player News starts
xx:02:30 soft start scheduler with early start of 70 sec, and late start of max 120 sec.