Open Sound Control (OSC) with your iPhone/iPad
Re: Open Sound Control (OSC) with your iPhone/iPad
hmm, cant see any tracks in Cardwalls on the iPad now.
And same goes with MAIN.
Cant see any tracks, but if ill press ex. talk over, it respond to that
Feels like, you can controll the PF but you cant get any visuals from it.
Anyone having the same issue?
In Remoting.
Input <my pc ip>:9000
delay 0
osc enable
outout:9001
mapping orppfrexx onair iPad
Transport UDp Unicast
And same goes with MAIN.
Cant see any tracks, but if ill press ex. talk over, it respond to that
Feels like, you can controll the PF but you cant get any visuals from it.
Anyone having the same issue?
In Remoting.
Input <my pc ip>:9000
delay 0
osc enable
outout:9001
mapping orppfrexx onair iPad
Transport UDp Unicast
Re: Open Sound Control (OSC) with your iPhone/iPad
Everything checked.
Open'd port 9000-9001 on router for 192.168.1.3 which is my PC.
RCM/OSC is running, Green Icon, says Input Started/Output Offline
I can change ex, talk over volume, but its like no information is beeing sent to the iPad instance.
All working now,
And now it works
Thanks!
Open'd port 9000-9001 on router for 192.168.1.3 which is my PC.
RCM/OSC is running, Green Icon, says Input Started/Output Offline
I can change ex, talk over volume, but its like no information is beeing sent to the iPad instance.
All working now,
I setup with iPad IP 192.168.1.8:9001Output: :port (example :9001 - without any ip-address!)
And now it works
Thanks!
Re: Open Sound Control (OSC) with your iPhone/iPad
Ah yes, if you are running it via a router, then it also needs an ip-address:port in the "Output:" setting to allow the router to recognize the port-forwarding
Bernd - radio42
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution
Re: Open Sound Control (OSC) with your iPhone/iPad
Sound like a network or connection issue for the 'Incomming' port.
First check your general settings within ProppFrexx (section 'GPIO'):
The Open Sound Control (OSC) settings should be as followed:
Input: ip-address:port (example 192.168.1.149:9000)
Output: :port (example :9001 - without any ip-address!)
Have you tried resetting your OCS connection within ProppFrexx?
This can be done by opening the Remote Control Monitor (RCM):
- in the Main Mixer Channel click on the RCM button
- in the popup window make a double-click on the text/icon next to 'OSC Server:' to start or stop it
- it should show Online/Offline respectively
- the running icon should be green
After that fully close your TouchOSC application on your iPad and start it again!
First check your general settings within ProppFrexx (section 'GPIO'):
The Open Sound Control (OSC) settings should be as followed:
Input: ip-address:port (example 192.168.1.149:9000)
Output: :port (example :9001 - without any ip-address!)
Have you tried resetting your OCS connection within ProppFrexx?
This can be done by opening the Remote Control Monitor (RCM):
- in the Main Mixer Channel click on the RCM button
- in the popup window make a double-click on the text/icon next to 'OSC Server:' to start or stop it
- it should show Online/Offline respectively
- the running icon should be green
After that fully close your TouchOSC application on your iPad and start it again!
Bernd - radio42
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution
Re: Open Sound Control (OSC) with your iPhone/iPad
Unfortunately, for androids there is no way how to transfer layout to mobile phone. Or is it?
Peter
Re: Open Sound Control (OSC) with your iPhone/iPad
Yes. Is there a way how to trasfer ipad version of template into android, i.e. samsung galaxy s3 phone or do I have to do it from scratch in touch OSC editor?
Peter
Re: Open Sound Control (OSC) with your iPhone/iPad
As said, not that I know of - but I guess that is more a question you would have to ask the 'TouchOSC' people.
Bernd - radio42
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution
Re: Open Sound Control (OSC) with your iPhone/iPad
Not that I know of - but that is more related to the 'TouchOSC' implementation I guess.
Bernd - radio42
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution
Re: Open Sound Control (OSC) with your iPhone/iPad
Hi,
I have tried and tried but I can't get it to work correctly.
The Main and Mixers-screens are working OK. But something goes wrong on the cartwall-screens....
It is possible to play the jingles, to activate PFL and LOOP, but no labels and no LED:s work.
I am using the latest version of TouchOSC on an iPad Air and the latest version of ProppFrexx in Win7.
I have tried and tried but I can't get it to work correctly.
The Main and Mixers-screens are working OK. But something goes wrong on the cartwall-screens....
It is possible to play the jingles, to activate PFL and LOOP, but no labels and no LED:s work.
I am using the latest version of TouchOSC on an iPad Air and the latest version of ProppFrexx in Win7.
Station manager | THE BEAT, Sweden | www.thebeat.se
Re: Open Sound Control (OSC) with your iPhone/iPad
Thanks. Now the names of the jingles are correct, but the "LEDs" still doin't work. Any idea?
Station manager | THE BEAT, Sweden | www.thebeat.se