MCU lcd

You have a question or need an advice about how to do something? Ask it here!
User avatar
radio42
Site Admin
Posts: 6643
Joined: 05 Apr 2012 16:26
Location: Hamburg, Germany
Contact:
Re: MCU lcd

Post by radio42 »

As said, I don't have any manual of the XTouch - I am afraid you need to contact the vendor of the XTouch to ask what exact MIDI message or syssex message (exact order of bytes) to send in order to display that value.
You can then use either the EXEC_SEND_MIDI_SHORTMSG or the EXEC_SEND_MIDI_SYSEXMSG command to send it.
djbony
Posts: 217
Joined: 13 May 2014 08:11
Re: MCU lcd

Post by djbony »

We don't understand :) When I use the $(mixeroutput1gain) macro and send my SysEx command to Xtouch, I get an @ at the display (If value is 0). When I put the macro in quotation marks, I get 64 at the display.
djbony
Posts: 217
Joined: 13 May 2014 08:11
Re: MCU lcd

Post by djbony »

${Outputmixer1name} works and displays the text correctly.
djbony
Posts: 217
Joined: 13 May 2014 08:11
Re: MCU lcd

Post by djbony »

When i send "-15.0dB" it will show -15.0dB ... Not string as string :)
djbony
Posts: 217
Joined: 13 May 2014 08:11
Re: MCU lcd

Post by djbony »

0xF0 0x00 0x00 0x66 0x14 0x12 0x00 "*[STRING:{${outputmixer1name}}:{rpad}:{6}] " "*[STRING:{${outputmixer2name}}:{rpad}:{6}] " "*[STRING:{${outputmixer3name}}:{rpad}:{6}] " "*[STRING:{${outputmixer4name}}:{rpad}:{6}] " " " "*[STRING:{${inputmixer4name}}:{rpad}:{6}] " "*[STRING:{${inputmixer1name}}:{rpad}:{6}] " "*[STRING:{${inputmixer2name}}:{rpad}:{6}] " "-15.0dB" 0xF7
djbony
Posts: 217
Joined: 13 May 2014 08:11
Re: MCU lcd

Post by djbony »

${mixeroutputXgain} and ${mixerinputXgain} string do not return
User avatar
radio42
Site Admin
Posts: 6643
Joined: 05 Apr 2012 16:26
Location: Hamburg, Germany
Contact:
Re: MCU lcd

Post by radio42 »

The ${outputmixer1gain} returns the 1st mixer channel gain as a string (-15.0…15.0).
So maybe you need to add the "dB" value in addition.

Else, as said, please clarify with the XTouch vendor what exact values are expected?!
I don't know how should help here, as I don't know the syntax of the XTouch - only the vendor knows!
djbony
Posts: 217
Joined: 13 May 2014 08:11
Re: MCU lcd

Post by djbony »

I contacted Behringer at several times ... Answers: Hi, Petr. Unfortunately the X-Touch is dependant on how developers have implemented the Mackie protocol in their software. This means it is up to the developers of that software to ensure compatibility. "Hi George,
well, but at least the sysex message header that displays the text on the display is given." Good afternoon, Petr. Unfortunately this isn't possible with the X-Touch. There is no Sysex command for this. ...
and then you will find that is possible!
djbony
Posts: 217
Joined: 13 May 2014 08:11
Re: MCU lcd

Post by djbony »

In my opinion, it only requires "1", "2", "-1", "-2" - clear string... Anything else I add to it...
djbony
Posts: 217
Joined: 13 May 2014 08:11
Re: MCU lcd

Post by djbony »

If the return value is string, why does 64 appear instead of "0"?
Last edited by djbony on 18 Feb 2020 22:41, edited 1 time in total.

Post Reply