Starting Config a D&R Webstation
Starting Config a D&R Webstation
I like to lear how conig the D&R Webstation.
First of all thanks to Benjamin Hartwich the videos hade help me to by Profffrexx.
i know ProppFexx is for a beginner not easy. He hade show me i must not have fear to Lean it.
Now i start wich the First Stepps. Sorry my English is not perfekt.
My Knollig is:
- Soundcard Routing i understand and its Running.
- Now i go to Programmin the Webstation and der is Comming the Questions.
all Questions are in a Serperat Post
Thank you all before vor your Help
and i hope alle these questens help in future erveryone ther Start it.
First of all thanks to Benjamin Hartwich the videos hade help me to by Profffrexx.
i know ProppFexx is for a beginner not easy. He hade show me i must not have fear to Lean it.
Now i start wich the First Stepps. Sorry my English is not perfekt.
My Knollig is:
- Soundcard Routing i understand and its Running.
- Now i go to Programmin the Webstation and der is Comming the Questions.
all Questions are in a Serperat Post
Thank you all before vor your Help
and i hope alle these questens help in future erveryone ther Start it.
Last edited by DJSven on 19 Apr 2020 21:15, edited 1 time in total.
1 Question Kickstart or Faderstart
I hade start with deas codes. I send he code from the webstation over GPIO Clint in Proppfrixx.
STATE_On.3 = 1, STATE_MODULE.3 = 1 >>
EXEC_COMMAND2 ${autoplay}|Equals(0)|PLS_CURRENT_PLAY_A
STATE_On.3 = 0, STATE_MODULE.3 = 0 >>
EXEC_COMMAND2 ${autoplay}|Equals(0)|PLS_CURRENT_EJECTNOFADE_A
and now the Funktion is Mixed
I Like
KICKSTART
Fader is 0 and ON is 1 no Start
Fader is 1 and ON is 1 Start
FADERSTART
ON is 1 and Fader 1 Start
ON is 0 and Fader 1 no Start
i know on this Prosion there have say no Funktion ist Autoplay on >> |Equals(0)
But i dont know wat is the code for
ON is 1 and Fader 1 Start
ON is 0 and Fader 1 no Start
it must be code with AND
The Same backword
EXEC_COMMAND2 ${autoplay}|Equals(0)|PLS_CURRENT_EJECTNOFADE_A
ON is 1 and Fader is going 0 EJECT
ON is going 0 and Fader is 1 EJECT
Thanks for you HELP
STATE_On.3 = 1, STATE_MODULE.3 = 1 >>
EXEC_COMMAND2 ${autoplay}|Equals(0)|PLS_CURRENT_PLAY_A
STATE_On.3 = 0, STATE_MODULE.3 = 0 >>
EXEC_COMMAND2 ${autoplay}|Equals(0)|PLS_CURRENT_EJECTNOFADE_A
and now the Funktion is Mixed
I Like
KICKSTART
Fader is 0 and ON is 1 no Start
Fader is 1 and ON is 1 Start
FADERSTART
ON is 1 and Fader 1 Start
ON is 0 and Fader 1 no Start
i know on this Prosion there have say no Funktion ist Autoplay on >> |Equals(0)
But i dont know wat is the code for
ON is 1 and Fader 1 Start
ON is 0 and Fader 1 no Start
it must be code with AND
The Same backword
EXEC_COMMAND2 ${autoplay}|Equals(0)|PLS_CURRENT_EJECTNOFADE_A
ON is 1 and Fader is going 0 EJECT
ON is going 0 and Fader is 1 EJECT
Thanks for you HELP
2 Qustion Comunication Webstation and Proppfrixx
I Know the Communiktion is Running over Localhost > USB about 127.0.0.1
My Problem is the Webstation have no VU Meter and i like to youse Proppfrixx and the APP from D&R Werbstation Meter.
When i youse the APP Meter i have no Communiktion with PrroFrixx. Close i The APP Mester the Kommuniktion is running.
I Like to youse Bouth. How cane i Do it.
My Problem is the Webstation have no VU Meter and i like to youse Proppfrixx and the APP from D&R Werbstation Meter.
When i youse the APP Meter i have no Communiktion with PrroFrixx. Close i The APP Mester the Kommuniktion is running.
I Like to youse Bouth. How cane i Do it.
Last edited by DJSven on 19 Apr 2020 21:27, edited 1 time in total.
Re: Starting Config a D&R Webstation
It is a matter of finding the correct settings in windows and proppfrexx in combination with a D&R Airlite. I have been working on this for a long time. Meanwhile, the Airlite has been off for a while because after a USB cable problem I doubt whether the USB interface of the computer is still good. (assuming that a webstation and airlite are equal)
tip: write your questions in google translate in your own language and copy them translated into this forum.
tip: write your questions in google translate in your own language and copy them translated into this forum.
Re: 2 Qustion Comunication Webstation and Proppfrixx
USB connection quality is not my problem. There is a D&R program that displays the UV meter. However, klene can communicate with ProppFrixx and this program at the same time. But I also want to if it is possible.
Re: Starting Config a D&R Webstation
is this also open in windows firewall?
Re: Starting Config a D&R Webstation
There is a PDF for the Airlite Meters. Maybe check this out if you haven't already. This is at the Airlite:
https://www.d-r.nl/wiki/dokuwiki/doku.php
https://www.d-r.nl/wiki/dokuwiki/doku.php
Re: Starting Config a D&R Webstation
I guess the question to run both in parallel (the Webstation VU Meter APP) AND the ProppFrexx remote communication is a question to ask D&R.
The Airlite and the Webstation use the same DLL (Airlite.dll) to communicate with external Apps, like ProppFrexx.
This post here gives an example mapping for the Airence: https://github.com/benhartwich/proppfrexx-remote
There is no need to combine ON and Fader, for the Airence as this one have a special SW-Code for this:
#define SW_USB1_FADERSTART 27
#define SW_USB2_FADERSTART 30
#define SW_USB3_FADERSTART 33
#define SW_USB4_FADERSTART 36
I.e. the FADERSTART is only triggered (1) when both ON=1 and the Fader is up.
Respectively is set back (to 0) when either ON=0 or the Fader is down.
I am not sure, if the Webstation has the same.
The Airlite and the Webstation use the same DLL (Airlite.dll) to communicate with external Apps, like ProppFrexx.
This post here gives an example mapping for the Airence: https://github.com/benhartwich/proppfrexx-remote
There is no need to combine ON and Fader, for the Airence as this one have a special SW-Code for this:
#define SW_USB1_FADERSTART 27
#define SW_USB2_FADERSTART 30
#define SW_USB3_FADERSTART 33
#define SW_USB4_FADERSTART 36
I.e. the FADERSTART is only triggered (1) when both ON=1 and the Fader is up.
Respectively is set back (to 0) when either ON=0 or the Fader is down.
I am not sure, if the Webstation has the same.
Bernd - radio42
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution
Re: Starting Config a D&R Webstation
THX radio42
you have give me the right answers
Thank you very mutch
I tell you when i get Anwers from D&A
the fader start is now running as i like
you have give me the right answers
Thank you very mutch
I tell you when i get Anwers from D&A
the fader start is now running as i like
The next Question Cardwall
The Cardwall sort at the mixer
Left _ Right
1 _ 7
2 _ 8
3 _ 9
4 _ 10
5 _ 11
6 _ 12
Buttons
In the Software is
in 2 rolls
1 _ 2
3 _ 4
5 _ 6
7 _ 8
9 _ 10
11 _ 12
cance i chance the layout too (sort)
1 _ 7
2 _ 8
3 _ 9
4 _ 10
5 _ 11
6 _ 12
Left _ Right
1 _ 7
2 _ 8
3 _ 9
4 _ 10
5 _ 11
6 _ 12
Buttons
In the Software is
in 2 rolls
1 _ 2
3 _ 4
5 _ 6
7 _ 8
9 _ 10
11 _ 12
cance i chance the layout too (sort)
1 _ 7
2 _ 8
3 _ 9
4 _ 10
5 _ 11
6 _ 12