WIN 10 Funktionsupdate 2004 (Probleme) NET Framework.
-
- Posts: 73
- Joined: 23 Aug 2013 17:10
- Location: Vienna
- Contact:
WIN 10 Funktionsupdate 2004 (Probleme) NET Framework.
Hallo Bernd
Nach dem Aufspielen des Funktionsupdates beendet sich PF automatisch nach dem Start.
Ich habe dir die Ereignisanzeige aufgenommen, vielleicht weißt du was hier Faul ist.
LG Tom aus Wien
Nach dem Aufspielen des Funktionsupdates beendet sich PF automatisch nach dem Start.
Ich habe dir die Ereignisanzeige aufgenommen, vielleicht weißt du was hier Faul ist.
LG Tom aus Wien
Re: WIN 10 Funktionsupdate 2004 (Probleme) NET Framework.
Yes, there must have been some issue with the latest win Update, ie. it must have been damaged some of your system. Not sure what.
So you can try to rollback that update and try it again.
The error looks like the update damaged the .NET runtime.
Please check, if you can repair or reinstall the .Net Framework.
Also check, if the Ident-Number has changed.
Does ProppFrexx start up at all or when does it terminate?
So you can try to rollback that update and try it again.
The error looks like the update damaged the .NET runtime.
Please check, if you can repair or reinstall the .Net Framework.
Also check, if the Ident-Number has changed.
Does ProppFrexx start up at all or when does it terminate?
Bernd - radio42
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution
-
- Posts: 73
- Joined: 23 Aug 2013 17:10
- Location: Vienna
- Contact:
Re: WIN 10 Funktionsupdate 2004 (Probleme) NET Framework.
Hallo Bernd ich habe das System wieder rückgesetzt, es war unmöglich Proppfrexx auszuführen gleich nach dem Laden der Programmdateien ist Proppfrexx abgestürzt. Gleich nach dem Laden (Logo wird angezeigt, und unten steht das alles nach und nach geladen wird init) anschließend würde das Interface öffnen. Selbst ob sich die Ident Nummer geändert hat wäre nicht mehr möglich gewesen zu überprüfen.
Ich gehe sehr davon aus dass hier nicht das Problem bei PF liegt, leider sind Updates die das NET Framework betreffen immer wieder bei mir ein Problem (oder Allgemein),das gleiche hatte ich auch beim 1909er Update Funktionsupdate. Hier startete PF aber noch erst nach 3-4 Minuten stürzte es ab.
Grüße Tom aus Wien
Ich gehe sehr davon aus dass hier nicht das Problem bei PF liegt, leider sind Updates die das NET Framework betreffen immer wieder bei mir ein Problem (oder Allgemein),das gleiche hatte ich auch beim 1909er Update Funktionsupdate. Hier startete PF aber noch erst nach 3-4 Minuten stürzte es ab.
Grüße Tom aus Wien
Re: WIN 10 Funktionsupdate 2004 (Probleme) NET Framework.
Hi Tom,
That sounds very odd ,if even the .Net updates are failing. What you can try is to reset the ProppFrexx mixer settings - maybe the sound devices have been all changed and are now flaky.
To do so delete the file called “Default.mixer” contained in the ProppFrexx AppUserData folder.
After that you need to setup your mixer settings again, but this might maybe help.
That sounds very odd ,if even the .Net updates are failing. What you can try is to reset the ProppFrexx mixer settings - maybe the sound devices have been all changed and are now flaky.
To do so delete the file called “Default.mixer” contained in the ProppFrexx AppUserData folder.
After that you need to setup your mixer settings again, but this might maybe help.
Bernd - radio42
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution
-
- Posts: 73
- Joined: 23 Aug 2013 17:10
- Location: Vienna
- Contact:
Re: WIN 10 Funktionsupdate 2004 (Probleme) NET Framework.
Hallo Bernd
Ich habe gute Nachrichten, nachdem ich das Backup rückgespielt habe ,habe ich nach Updates suchen lassen.
(obwohl es ja auch zuvor keine gab) und siehe da ganz neu Kumulatives Update für NET Framework 3.5 und 4.8 für Version 1909.
Dieses war vorher noch nicht da dürfte ganz neu gekommen sein.
Nachdem aufspielen Teststart von Proppfrexx alles hat funktioniert und ich habe es gleich auf 4.2.0.8 aktualisiert.
Anschließend ein Backup gemacht, dann nochmals auf 2004 geupdatet sofort wieder kam ein Update von Frame Network wieder nach installiert.
Diesmal startete ProppFrexx auf 2004 ohne Probleme, also Problem behoben.
Aber was da genau hin oder falsch war????? das weiß keiner.
Danke trotzdem für deine Hilfe Bernd.
Grüße aus Wien.
Ich habe gute Nachrichten, nachdem ich das Backup rückgespielt habe ,habe ich nach Updates suchen lassen.
(obwohl es ja auch zuvor keine gab) und siehe da ganz neu Kumulatives Update für NET Framework 3.5 und 4.8 für Version 1909.
Dieses war vorher noch nicht da dürfte ganz neu gekommen sein.
Nachdem aufspielen Teststart von Proppfrexx alles hat funktioniert und ich habe es gleich auf 4.2.0.8 aktualisiert.
Anschließend ein Backup gemacht, dann nochmals auf 2004 geupdatet sofort wieder kam ein Update von Frame Network wieder nach installiert.
Diesmal startete ProppFrexx auf 2004 ohne Probleme, also Problem behoben.
Aber was da genau hin oder falsch war????? das weiß keiner.
Danke trotzdem für deine Hilfe Bernd.
Grüße aus Wien.
Re: WIN 10 Funktionsupdate 2004 (Probleme) NET Framework.
Super , that it’s working again!
Bernd - radio42
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution