Different output per mediatype

You are missing a feature or need an enhancement? Post your suggestion here!
Post Reply
ExIT_FM
Posts: 76
Joined: 18 Jul 2015 00:43
Different output per mediatype

Post by ExIT_FM »

Hi Bernd,

Is that possible to set an output channel for each mediatype?
ie. I have 3 channel like DECKS, SPOTS, STDBY which mixed together to the OUT channel.

"Musics" are played on the DECKS channel,
"Jingles" are played on the "SPOTS" channel, and
"Reports" (or anything else) are played on STDBY channel.

Regards,
David
User avatar
radio42
Site Admin
Posts: 8295
Joined: 05 Apr 2012 16:26
Location: Hamburg, Germany
Contact:
Re: Different output per mediatype

Post by radio42 »

No, an output per media type wouldn't make any sense at all!

BUT, you can of course define a different output mixer channel per:
- DJ Player (e.g. DJ A goes to Out1; DJ B goes to Out2 etc.)
- Standby Player (even each standby player could have its own output)
- Cartwall I and II could get a different mixer output channel as well

See general settings, section 'Routing'.
ExIT_FM
Posts: 76
Joined: 18 Jul 2015 00:43
Re: Different output per mediatype

Post by ExIT_FM »

Yes, I know I can change the routing that way, but I would like to change it when a track loads.
For example when a jingle loads to Deck A, I'd like to change the output of "Deck A" to SPOTS by a command.
Is that possible?
User avatar
radio42
Site Admin
Posts: 8295
Joined: 05 Apr 2012 16:26
Location: Hamburg, Germany
Contact:
Re: Different output per mediatype

Post by radio42 »

No, that is not possible.
I even assume, that this would confuse 99% of all users ;-)
As the user must then hardly think which fader to use...

Post Reply