Page 1 of 2

PF streaming with Breakaway One

Posted: 24 Dec 2019 09:38
by JWvanGulik
Hi, I have been fine-tuning my PF system to a perfect radio station (to my taste) and am now looking for going "on-air". My Breakaway One has a perfect kick-ass processing and I would like to get my sound on-line. Does anyone have experience with streaming with Breakaway One or streaming in general? My radio experience is quite extensive, but I'm from the analogue generation...

Thanks in advance, JW.

Re: PF streaming with Breakaway One

Posted: 08 Jan 2020 11:29
by Inzane8305
Streaming with Breakaway One: I think you should see support at BreakAway homepage. (Setting up Streaming)
PF, on the other hand, is most capable to stream on it's own, you just need to download the software for Icecast or Shoutcast (and have a little "DOS-program" running) but that will not be processed with BreakAway One unless you do some software routing with the Breakaway Pipeline. Stereotool with PF (imho) is better because it is a VST/DSP that you then can stream directly.

Re: PF streaming with Breakaway One

Posted: 08 Jan 2020 17:49
by radio42
A few users do use Breakaway. In the end it’s a matter of Taste ;-)

I guess there is already a very easy way to use Breakaway via its Breakaway Pipeline!
Ie. in this setup Breakaway acts like a virtual sound device, which can directly be used and setup within ProppFrexx as either an output or even input mixer channel.
So the use and integration is already and easily possible.

Re: PF streaming with Breakaway One

Posted: 10 Jan 2020 10:25
by JWvanGulik
Hi guys, thanks for your suggestions. Currently I have my Breakaway One in a pipeline (on the same machine). I'm a nitwit when it comes to streaming and how to set this up. Is there some kind of manual available from PF how this would be possible the easiest way? I'm so curious how my sound sounds like when it is "on-air"!

Re: PF streaming with Breakaway One

Posted: 10 Jan 2020 14:36
by radio42
To setup streaming, go to the ‚Network Streaming Monitor‘ panel and add a new Streaming Server.
Press on the ? Icon at the very top right to get help.
Esssentially you can define here which audio signal from which mixer channel you want to use as a source.
If you are using breakaway pipeline but not it streaming function, it would add its processing after the signal left the mixer output.
So you would need to feed it’s processed audio signal also back in as an input mixer channel and than use this as the source for streaming.

Re: PF streaming with Breakaway One

Posted: 14 Jan 2020 22:28
by djbony
JWvanGulik wrote: 10 Jan 2020 10:25 Hi guys, thanks for your suggestions. Currently I have my Breakaway One in a pipeline (on the same machine). I'm a nitwit when it comes to streaming and how to set this up. Is there some kind of manual available from PF how this would be possible the easiest way? I'm so curious how my sound sounds like when it is "on-air"!
Hello,
my config... P.

Re: PF streaming with Breakaway One

Posted: 25 Jan 2020 14:31
by JWvanGulik
Hi, I now have my stream online, but I'm streaming from Breakaway One instead of PF. Works perfect, only issue that I now have is that the Artist - Song information is not shown on the Shoutcast server. I have read some posts on this issue, and it seems possible to get song information from PF to Breakaway. Anyone has this experience? I have the feeling the information from PF does not get to Breakaway at this moment. Thx, JW

By the way, here's my station located: http://84.24.26.43:8000

Re: PF streaming with Breakaway One

Posted: 25 Jan 2020 15:15
by radio42
You might also setup a streaming server within ProppFrexx (with all the admin credentials) but do NOT start it!
You can than set the Force Title Update option.
This way, ProppFrexx does not stream but still updates the title info of a server.

Re: PF streaming with Breakaway One

Posted: 26 Jan 2020 12:49
by Michel67
JWvanGulik wrote: 25 Jan 2020 14:31 Hi, I now have my stream online, but I'm streaming from Breakaway One instead of PF. Works perfect, only issue that I now have is that the Artist - Song information is not shown on the Shoutcast server. I have read some posts on this issue, and it seems possible to get song information from PF to Breakaway. Anyone has this experience? I have the feeling the information from PF does not get to Breakaway at this moment. Thx, JW

By the way, here's my station located: http://84.24.26.43:8000
sounds good (klinkt goed)

Re: PF streaming with Breakaway One

Posted: 26 Jan 2020 19:12
by JWvanGulik
Hi Bernd,

I still don't get it to work. You mean set up a stream but uncheck "Connect at start up" and uncheck "Reconnect on Error every"? The rest I filled in, but no song information reaches Breakaway. Do you by any chance now what to fill in at "Location" in Breakaway? Thx, JW.