Command for jingle

You have a question or need an advice about how to do something? Ask it here!
Post Reply
Farbo
Posts: 346
Joined: 11 Apr 2012 15:04

Command for jingle

Post by Farbo » 04 Jul 2012 08:59

Is it possible to have one jingle track with command that would stop stream server after it is stopped or reaches next cue point? This would be usefull for example when using icecast´s autoDJ feature, i.e. local moderator finishes with last jingle and then stream server stops and icecast´s autoDJ feature will overtake.
Peter

User avatar
radio42
Site Admin
Posts: 5628
Joined: 05 Apr 2012 16:26

Re: Command for jingle

Post by radio42 » 04 Jul 2012 21:06

Yes, you might assign control-commands directly to a Track.
Make sure to save those meta data to either the TAG data or a dedictaed .pfmd file.

The control-command to assign would be e.g. "STREAMING_SERVER_STOP_ALL" or "STREAMING_SERVER_STOP" (see user manual for details).

There are two options to assign control-commands to a media entry (track):

1) General Track Control-Commands Events (i.e. 'On Track Loaded', 'On Track Played' and 'On Track Stopped').
In your case I guess the 'On Track Stopped' might be used.
See 'Track Settings' - 'Track Control-Command Events...' to assign them.

2) Track Position Events:
See e.g. 'TAG Editor' - 'Event Data'; make a right-click in the event table and select 'Add Execute Command Event...'.
An execute command track event is related to a certain position within the track at which the command should be triggered.

Post Reply

Who is online

Users browsing this forum: No registered users and 6 guests