ProppFrexx in combination with D&R Webstation, don't communicate
Re: ProppFrexx in combination with D&R Webstation, don't communicate
Thanks for your screenshots.
It seems, that you are using the same port number for both, the TCP RemoteControl Server Port, as well as the GPIO Ext. Service Port. This will be a conflict, as you should specify a different port for each (like in the default values).
So please specify a different port for each and adjust your settings. EG. if you change the port for the GPIO Ext. Service you need to adjust the connection in the GPIO Client accordingly. After, please try again.
It seems, that you are using the same port number for both, the TCP RemoteControl Server Port, as well as the GPIO Ext. Service Port. This will be a conflict, as you should specify a different port for each (like in the default values).
So please specify a different port for each and adjust your settings. EG. if you change the port for the GPIO Ext. Service you need to adjust the connection in the GPIO Client accordingly. After, please try again.
Bernd - radio42
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution
-
- Posts: 13
- Joined: 25 Sep 2021 17:43
Re: ProppFrexx in combination with D&R Webstation, don't communicate
Thank for your quick reply! I have set the port of the TCP to another number. It still doesn't work. Maybe a sidenote: i am starting the GPIO-client manually by myself. Is it possible that could cause any problems?radio42 wrote: ↑06 Oct 2021 23:39 Thanks for your screenshots.
It seems, that you are using the same port number for both, the TCP RemoteControl Server Port, as well as the GPIO Ext. Service Port. This will be a conflict, as you should specify a different port for each (like in the default values).
So please specify a different port for each and adjust your settings. EG. if you change the port for the GPIO Ext. Service you need to adjust the connection in the GPIO Client accordingly. After, please try again.
After some troubleshooting i can say that the problem has to do something with the connection of the GPIO-client and ProppFrexx. In some way they don't communicatie to each other. Mixer is doing fine with the GPIO, as you can see in the logs! Also i checked the same commands in the Keyboard Control Mapper and there are the commands working fine.
Hopefully you could help me further, i am really appreciating your effort !
Re: ProppFrexx in combination with D&R Webstation, don't communicate
I guess this post/answer from Michael67 belong to your question: https://www.proppfrexx.radio42.com/foru ... 977#p15977
But you are right, the issue seems to be the communication between the GPIO client and ProppFrexx ONAIR.
Sowjets did you change the default values? Please try them as in the above post.
But you are right, the issue seems to be the communication between the GPIO client and ProppFrexx ONAIR.
Sowjets did you change the default values? Please try them as in the above post.
Bernd - radio42
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution
Re: ProppFrexx in combination with D&R Webstation, don't communicate
change GPIO Ext service from 4767 to 9042radio42 wrote: ↑07 Oct 2021 08:42 I guess this post/answer from Michael67 belong to your question: https://www.proppfrexx.radio42.com/foru ... 977#p15977
But you are right, the issue seems to be the communication between the GPIO client and ProppFrexx ONAIR.
Sowjets did you change the default values? Please try them as in the above post.
change recieve port 18152 to 19550 and send port from 18153 to 19551
If I apply your settings here, it will not work either.
-
- Posts: 13
- Joined: 25 Sep 2021 17:43
Re: ProppFrexx in combination with D&R Webstation, don't communicate
I did change the default values and i took other ports for the TCP and the GPIO-client. But still: no connection. If i do the default port 9042 it gives a connection error too.radio42 wrote: ↑07 Oct 2021 08:42 I guess this post/answer from Michael67 belong to your question: https://www.proppfrexx.radio42.com/foru ... 977#p15977
But you are right, the issue seems to be the communication between the GPIO client and ProppFrexx ONAIR.
Sowjets did you change the default values? Please try them as in the above post.
-
- Posts: 13
- Joined: 25 Sep 2021 17:43
Re: ProppFrexx in combination with D&R Webstation, don't communicate
When i change it to 9042 it won't even make a connection, i get a connection error: 'Kan geen verbinding maken omdat de doelcomputer de verbinding actief heeft geweigerd: 127.0.0.1:9042.Michel67 wrote: ↑07 Oct 2021 09:06change GPIO Ext service from 4767 to 9042radio42 wrote: ↑07 Oct 2021 08:42 I guess this post/answer from Michael67 belong to your question: https://www.proppfrexx.radio42.com/foru ... 977#p15977
But you are right, the issue seems to be the communication between the GPIO client and ProppFrexx ONAIR.
Sowjets did you change the default values? Please try them as in the above post.
change recieve port 18152 to 19550 and send port from 18153 to 19551
If I apply your settings here, it will not work either.
If i change the receive port and send port to that ports (that are used by the Airlite), i have no connection with the D&R Webstation. The webstation is working with other ports. Maybe you could take a look with TeamViewer to see what's wrong? Or do you know another solution?
Re: ProppFrexx in combination with D&R Webstation, don't communicate
Airlite Control status?
Re: ProppFrexx in combination with D&R Webstation, don't communicate
I hope you have changed it on both sides: ProppFrexx ONAIR and the GPIO Client!
Further many systems don’t work with the local host address 127.0.0.1. So please use the real IP address instead.
Further many systems don’t work with the local host address 127.0.0.1. So please use the real IP address instead.
Bernd - radio42
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution
-
- Posts: 13
- Joined: 25 Sep 2021 17:43
Re: ProppFrexx in combination with D&R Webstation, don't communicate
Hi! Many thanks for all the support. I tried to fix the problem with the ports Michel gave me and i tried to fix it to use my own ip instead of localhost. Unfortunately it still won't work. And yes, if i changed the port on the GPIO client main tab i also did that on the GPIO settings in Propfrexx Onair.
Is there something i don't see or has it anything to do with my Firewall/Virusscanner?