How to set light from the control buttons d&r airlite
How to set light from the control buttons d&r airlite
Hello,
I recently bought the airlight and all is working well. Only the lights from the 16 buttons that I use for the 2 cartwall players are not working. I would like them to be green when inactive and red when active. Can someone please tell me how I can fix that?
Thank you in advance.
Kind regards Mark
I recently bought the airlight and all is working well. Only the lights from the 16 buttons that I use for the 2 cartwall players are not working. I would like them to be green when inactive and red when active. Can someone please tell me how I can fix that?
Thank you in advance.
Kind regards Mark
Re: How to set light from the control buttons d&r airlite
You can use the following control commands to set the LEDs of your Airlite:
EXEC_SEND_DRAIRLITE_SETLED
EXEC_SEND_DRAIRLITE_SETLEDBLINK
Related posts on how to use them can be found here (some are related to the Airence, but the Airlite is working in the same way):
https://www.proppfrexx.radio42.com/foru ... f=5&t=1701
https://www.proppfrexx.radio42.com/foru ... f=9&t=1859
https://www.proppfrexx.radio42.com/foru ... f=8&t=1392
EXEC_SEND_DRAIRLITE_SETLED
EXEC_SEND_DRAIRLITE_SETLEDBLINK
Related posts on how to use them can be found here (some are related to the Airence, but the Airlite is working in the same way):
https://www.proppfrexx.radio42.com/foru ... f=5&t=1701
https://www.proppfrexx.radio42.com/foru ... f=9&t=1859
https://www.proppfrexx.radio42.com/foru ... f=8&t=1392
Bernd - radio42
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution
Re: How to set light from the control buttons d&r airlite
Maybe this screenprint helps
Last edited by atlantic on 24 Dec 2019 17:44, edited 1 time in total.
Re: How to set light from the control buttons d&r airlite
Thank you both for your reply. I wil try to fix this tonight.
Merry christmas!
Mark
Merry christmas!
Mark
Re: How to set light from the control buttons d&r airlite
Hello,
The issue is solved for the first row (CW1). But when I push a green button from row B (CW2) this stays green and the button left from it (row A CW1) turns red. Any idea what I've done wrong?
Kind regards Mark
The issue is solved for the first row (CW1). But when I push a green button from row B (CW2) this stays green and the button left from it (row A CW1) turns red. Any idea what I've done wrong?
Kind regards Mark
Re: How to set light from the control buttons d&r airlite
No, as I/we don’t know your command mapping for the events you used.
And I/we also don’t know how you would like to map the buttons to the cartwalls.
Note, that the buttons of the Airlite are numbered.
Also note, that the cartwall carts are also numbered. Cartwall 1 and 2 are using the same cardIDs!
But these numbers are of course not matching the Airlite buttons.
So you probably need to apply some math to the cardIDs.
See the *INT[...] macro function for details (in the user manual appendix).
And I/we also don’t know how you would like to map the buttons to the cartwalls.
Note, that the buttons of the Airlite are numbered.
Also note, that the cartwall carts are also numbered. Cartwall 1 and 2 are using the same cardIDs!
But these numbers are of course not matching the Airlite buttons.
So you probably need to apply some math to the cardIDs.
See the *INT[...] macro function for details (in the user manual appendix).
Bernd - radio42
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution