D&R Airlite
-
- Posts: 40
- Joined: 02 Sep 2018 16:12
D&R Airlite
Dear forum members, I am in possession of the d & r airlite and run into a problem. I have set the airlite as described on this forum. Still, I have a problem with the nonstop button. When I activate the nonstop mode, I only get sound from deck a. I do not get any sound on deck b and c, but proppfrexx just continues playing.
Re: D&R Airlite
What description did you use?
Did you also adjust the Alternative Routing setup within ProppFrexx accordingly?
E.g. like described here: viewtopic.php?f=9&t=1778&p=8740
Did you also adjust the Alternative Routing setup within ProppFrexx accordingly?
E.g. like described here: viewtopic.php?f=9&t=1778&p=8740
Bernd - radio42
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution
-
- Posts: 40
- Joined: 02 Sep 2018 16:12
Re: D&R Airlite
Dear Bernd, I did everything everything as described in this link https://github.com/benhartwich/proppfre ... ee / Airlite. However, I keep the problem that I only have sound on player a in nonstop mode.
Re: D&R Airlite
Well, as I didn't provide these settings, I suggest to contact the author for help.
I'll do that as well and point him to your post here...
I'll do that as well and point him to your post here...
Bernd - radio42
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution
-
- Posts: 86
- Joined: 03 Aug 2012 09:36
Re: D&R Airlite
Hi,
sound like the proppfrexx can´t send the commands to airlite to turn on the On-knobs for each channel when the player is started at automatic mode. Have you imported the control commands at settings => commands/events?
Have a look to the debug log. If you find any line which says: could not dispatch command, you should reinstall the drivers of airlite. The drivers are really rubish, so you have to struggle a little bit till you can use airlite with proppfrexx fully.
sound like the proppfrexx can´t send the commands to airlite to turn on the On-knobs for each channel when the player is started at automatic mode. Have you imported the control commands at settings => commands/events?
Have a look to the debug log. If you find any line which says: could not dispatch command, you should reinstall the drivers of airlite. The drivers are really rubish, so you have to struggle a little bit till you can use airlite with proppfrexx fully.
-
- Posts: 40
- Joined: 02 Sep 2018 16:12
Re: D&R Airlite
Hi Bernd, I have now got the airlite working with proppfrexx. However, I still have a problem. I now notice that proppfrexx stops the jingles prematurely and continues with the next track. I have never had this problem without the airlite. Do you know where to look for this problem.
Re: D&R Airlite
If you wouldn’t say that you never had this issue before using the Airlite, I would say it might be related to cue-points.
But this wouldn’t make sense in this case anymore.
I know, that the Airlite macros being imported to switch certain channels on and off.
Could it be, that the start play of the next track actually deactivated the Airlite mixer channel of the previous track?
I am not sure, but if that is the case, please contact the author of the Airlite settings for help, as I personally don’t owe an Airlite to play with.
But this wouldn’t make sense in this case anymore.
I know, that the Airlite macros being imported to switch certain channels on and off.
Could it be, that the start play of the next track actually deactivated the Airlite mixer channel of the previous track?
I am not sure, but if that is the case, please contact the author of the Airlite settings for help, as I personally don’t owe an Airlite to play with.
Bernd - radio42
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution
-
- Posts: 96
- Joined: 25 Dec 2014 11:51
- Contact:
Re: D&R Airlite
https://www.youtube.com/watch?v=IfZiGkI ... e=youtu.be)
I, on the other hand, strangly does not find folders as Benjamin refers to. There is no GPIO Client folder where i can drop in files.
This is a printscreen from Benjamin's Youtube video (I, on the other hand, strangly does not find folders as Benjamin refers to. There is no GPIO Client folder where i can drop in files.
Re: D&R Airlite
Guess you just create a new and empty one yourself.
Bernd - radio42
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution