ProppFrexx in combination with D&R Webstation, don't communicate

You have a question or need an advice about how to do something? Ask it here!
royblokzijl
Posts: 13
Joined: 25 Sep 2021 17:43
ProppFrexx in combination with D&R Webstation, don't communicate

Post by royblokzijl »

Hi!

Recently i bought the D&R Webstation to use it with ProppFrexx Onair. I had installed everything like Benjamin Hartwich said in his video https://www.youtube.com/watch?v=IfZiGkI8Nj8. Everything is working fine: ProppFrexx is playing songs and on the GPIO Client monitor i see that the mixing console is communicating with the GPIO Client.

However: there's one problem. The GPIO-client is not communicating with ProppFrexx Onair.

On the Main Tab the connection is connected (tcpex://127.0.0.1:4767/ProppFrexxRemoteService) and also the D&R Mixer is connected (127.0.0.1 / Receive: 18152 / Send: 18153). In ProppFrexx Onair the GPIO Extension Service is also on for port 4767. And the same password is used on both Onair en GPIO-client.

What is wrong with the settings?

What i've tried:
- Shut down the Firewall
- Used other ports for instance the manual port 9042 --> Gives no connection
- Checked of there was a problem with the commands in the mapper of the GPIO-client, it was all fine, because i filled in the same parameters in the keyboard mapping and there everything worked fine.

I hope you could help me out with the problem, maybe you had the same issue? Let me know, thankyou in advance!
User avatar
Michel67
Posts: 166
Joined: 28 Nov 2016 19:53
Re: ProppFrexx in combination with D&R Webstation, don't communicate

Post by Michel67 »

test performed via 'monitor' ?
Naamloos.jpg
correct sound settings windows?
Knipsel.JPG
royblokzijl
Posts: 13
Joined: 25 Sep 2021 17:43
Re: ProppFrexx in combination with D&R Webstation, don't communicate

Post by royblokzijl »

Michel67 wrote: 25 Sep 2021 21:14 test performed via 'monitor' ?
Naamloos.jpg

correct sound settings windows?
Knipsel.JPG
Hi Michel,

Yes i had tested with the monitor. When i push a button, i see that the button is pushed on the monitor. Also the audio settings are like your picture!
User avatar
Michel67
Posts: 166
Joined: 28 Nov 2016 19:53
Re: ProppFrexx in combination with D&R Webstation, don't communicate

Post by Michel67 »

and does GPIO also start up together with Proppfrexx? I have an Airlite and I didn't get it working in the beginning, but in the end it worked. I don't know if there is a difference between an Airlite and Webstation.
royblokzijl
Posts: 13
Joined: 25 Sep 2021 17:43
Re: ProppFrexx in combination with D&R Webstation, don't communicate

Post by royblokzijl »

Michel67 wrote: 25 Sep 2021 21:54 and does GPIO also start up together with Proppfrexx? I have an Airlite and I didn't get it working in the beginning, but in the end it worked. I don't know if there is a difference between an Airlite and Webstation.
No thats the strange thing.. I have to open the GPIO client manual. Normally it would start when i start ProppFrexx right? How did you fix it?? I think the consoles are quite the same.
User avatar
radio42
Site Admin
Posts: 8295
Joined: 05 Apr 2012 16:26
Location: Hamburg, Germany
Contact:
Re: ProppFrexx in combination with D&R Webstation, don't communicate

Post by radio42 »

Try the real IP address in your connection address (e.g. not tcpex://127.0.0.1:4767/ProppFrexxRemoteService; but instead of 127.0.0.1 use the real IP address) - or just empty that field, as then it should auto discover the correct address.
royblokzijl
Posts: 13
Joined: 25 Sep 2021 17:43
Re: ProppFrexx in combination with D&R Webstation, don't communicate

Post by royblokzijl »

radio42 wrote: 25 Sep 2021 22:15 Try the real IP address in your connection address (e.g. not tcpex://127.0.0.1:4767/ProppFrexxRemoteService; but instead of 127.0.0.1 use the real IP address) - or just empty that field, as then it should auto discover the correct address.
Used my own IP Adress instead, no connection. Filled in nothing, main tab says connected, but no output at ProppFrexx Onair
User avatar
radio42
Site Admin
Posts: 8295
Joined: 05 Apr 2012 16:26
Location: Hamburg, Germany
Contact:
Re: ProppFrexx in combination with D&R Webstation, don't communicate

Post by radio42 »

Is the GPIO Ext. Service enabled in ProppFrexx ONAIR?
And does the main screen of the GPIO client says it is connected?
And make sure you use the correct port, default is 9042.
Please send a screenshot from ProppFrexx GPIO settings as well as the main screen of the GPIO client.

If yes, please enable temp. the Debug logging and send me the debug .log file generates (or check yourself, if you can spot anything).
Note, you can enable it for both: ProppFrexx and the GPIO client.
The logs can be found in the AppUserData folders of each… eg. %appdata%\radio42\…
User avatar
Michel67
Posts: 166
Joined: 28 Nov 2016 19:53
Re: ProppFrexx in combination with D&R Webstation, don't communicate

Post by Michel67 »

you wrote that my audio settings are the same as yours. check the following: connect an analog sound source to your webstation and check in your audio settings (windows) which input it is visible on, called PROG by me (see earlier picture). This PROG must be selected in Proppfrexx under Input Devices. Finally, despite turning off the firewall, set it up again.
Attachments
PF_prog.JPG
PF_prog.JPG (31.17 KiB) Viewed 2699 times
royblokzijl
Posts: 13
Joined: 25 Sep 2021 17:43
Re: ProppFrexx in combination with D&R Webstation, don't communicate

Post by royblokzijl »

radio42 wrote: 26 Sep 2021 00:09 Is the GPIO Ext. Service enabled in ProppFrexx ONAIR?
And does the main screen of the GPIO client says it is connected?
And make sure you use the correct port, default is 9042.
Please send a screenshot from ProppFrexx GPIO settings as well as the main screen of the GPIO client.

If yes, please enable temp. the Debug logging and send me the debug .log file generates (or check yourself, if you can spot anything).
Note, you can enable it for both: ProppFrexx and the GPIO client.
The logs can be found in the AppUserData folders of each… eg. %appdata%\radio42\…
Hi!

Here you can see my settings. Also the log of the GPIO Client.

Image

and the code:

Code: Select all

25-9-2021 16:36:42: GPIO Debug Log started. v4.2.6.3
25-9-2021 16:36:44: AirliteCallback: Type=EVENT, ID=STATE_MODULE
25-9-2021 16:36:44: AirliteCallback: Type=EVENT, ID=STATE_ON
25-9-2021 16:36:45: AirliteCallback: Type=EVENT, ID=STATE_MODULE
25-9-2021 16:36:45: AirliteCallback: Type=EVENT, ID=STATE_ON
25-9-2021 16:36:45: AirliteCallback: Type=EVENT, ID=STATE_MODULE
25-9-2021 16:36:45: AirliteCallback: Type=EVENT, ID=STATE_ON
25-9-2021 16:36:46: AirliteCallback: Type=EVENT, ID=STATE_MODULE
25-9-2021 16:36:46: AirliteCallback: Type=EVENT, ID=STATE_ON
25-9-2021 16:36:49: AirliteCallback: Type=EVENT, ID=STATE_MODULE
25-9-2021 16:36:49: AirliteCallback: Type=EVENT, ID=STATE_ON
25-9-2021 16:36:49: AirliteCallback: Type=EVENT, ID=STATE_MODULE
25-9-2021 16:36:49: AirliteCallback: Type=EVENT, ID=STATE_ON
25-9-2021 16:36:50: AirliteCallback: Type=EVENT, ID=STATE_MODULE
25-9-2021 16:36:50: AirliteCallback: Type=EVENT, ID=STATE_ON
25-9-2021 16:36:51: AirliteCallback: Type=EVENT, ID=STATE_MODULE
25-9-2021 16:36:51: AirliteCallback: Type=EVENT, ID=STATE_ON
25-9-2021 16:36:51: AirliteCallback: Type=EVENT, ID=STATE_MODULE
25-9-2021 16:36:51: AirliteCallback: Type=EVENT, ID=STATE_ON
25-9-2021 16:36:51: AirliteCallback: Type=EVENT, ID=STATE_MODULE
25-9-2021 16:36:51: AirliteCallback: Type=EVENT, ID=STATE_ON
25-9-2021 16:36:53: AirliteCallback: Type=EVENT, ID=STATE_MODULE
25-9-2021 16:36:53: AirliteCallback: Type=EVENT, ID=STATE_ON
25-9-2021 16:36:55: AirliteCallback: Type=EVENT, ID=STATE_MODULE
25-9-2021 16:36:55: AirliteCallback: Type=EVENT, ID=STATE_ON
25-9-2021 16:36:56: AirliteCallback: Type=EVENT, ID=STATE_TRACK
25-9-2021 16:36:56: AirliteCallback: Type=EVENT, ID=STATE_FADER
25-9-2021 16:36:57: AirliteCallback: Type=EVENT, ID=STATE_ON
25-9-2021 16:36:57: AirliteCallback: Type=EVENT, ID=STATE_MODULE
25-9-2021 16:36:57: AirliteCallback: Type=EVENT, ID=STATE_FADER
25-9-2021 16:36:58: AirliteCallback: Type=EVENT, ID=STATE_MODULE
25-9-2021 16:36:58: AirliteCallback: Type=EVENT, ID=STATE_FADER
25-9-2021 16:36:58: AirliteCallback: Type=EVENT, ID=STATE_MODULE
25-9-2021 16:36:58: AirliteCallback: Type=EVENT, ID=STATE_FADER
25-9-2021 16:36:59: AirliteCallback: Type=EVENT, ID=STATE_MODULE
25-9-2021 16:36:59: AirliteCallback: Type=EVENT, ID=STATE_FADER
25-9-2021 16:36:59: AirliteCallback: Type=EVENT, ID=STATE_TRACK
25-9-2021 16:36:59: AirliteCallback: Type=EVENT, ID=STATE_FADER
25-9-2021 16:37:00: AirliteCallback: Type=EVENT, ID=STATE_ON
25-9-2021 16:37:00: AirliteCallback: Type=EVENT, ID=STATE_MODULE
25-9-2021 16:37:00: DispatchCommand: EXEC_COMMAND2 ${autoplay}|Equals(0)|PLS_CURRENT_PLAY_A
25-9-2021 16:37:00: DispatchCommand Reply: ERROR: De objectverwijzing is niet op een exemplaar van een object ingesteld.
25-9-2021 16:37:00: AirliteCallback: Type=EVENT, ID=STATE_FADER
25-9-2021 16:37:01: AirliteCallback: Type=EVENT, ID=STATE_MODULE
25-9-2021 16:37:01: DispatchCommand: EXEC_COMMAND2 ${autoplay}|Equals(0)|PLS_CURRENT_EJECTNOFADE_A
25-9-2021 16:37:01: DispatchCommand Reply: ERROR: De objectverwijzing is niet op een exemplaar van een object ingesteld.
25-9-2021 16:37:01: AirliteCallback: Type=EVENT, ID=STATE_FADER
25-9-2021 16:37:01: AirliteCallback: Type=EVENT, ID=STATE_MODULE
25-9-2021 16:37:01: DispatchCommand: EXEC_COMMAND2 ${autoplay}|Equals(0)|PLS_CURRENT_PLAY_A
25-9-2021 16:37:01: DispatchCommand Reply: ERROR: De objectverwijzing is niet op een exemplaar van een object ingesteld.
25-9-2021 16:37:01: AirliteCallback: Type=EVENT, ID=STATE_FADER
25-9-2021 16:37:01: AirliteCallback: Type=EVENT, ID=STATE_MODULE
25-9-2021 16:37:01: DispatchCommand: EXEC_COMMAND2 ${autoplay}|Equals(0)|PLS_CURRENT_EJECTNOFADE_A
25-9-2021 16:37:01: DispatchCommand Reply: ERROR: De objectverwijzing is niet op een exemplaar van een object ingesteld.
25-9-2021 16:37:01: AirliteCallback: Type=EVENT, ID=STATE_FADER
25-9-2021 16:37:15: AirliteCallback: Type=EVENT, ID=STATE_MODULE
25-9-2021 16:37:15: DispatchCommand: EXEC_COMMAND2 ${autoplay}|Equals(0)|PLS_CURRENT_PLAY_A
25-9-2021 16:37:15: DispatchCommand Reply: ERROR: De objectverwijzing is niet op een exemplaar van een object ingesteld.
25-9-2021 16:37:15: AirliteCallback: Type=EVENT, ID=STATE_FADER
25-9-2021 16:37:17: AirliteCallback: Type=EVENT, ID=STATE_MODULE
25-9-2021 16:37:17: DispatchCommand: EXEC_COMMAND2 ${autoplay}|Equals(0)|PLS_CURRENT_EJECTNOFADE_A
25-9-2021 16:37:17: DispatchCommand Reply: ERROR: De objectverwijzing is niet op een exemplaar van een object ingesteld.
25-9-2021 16:37:17: AirliteCallback: Type=EVENT, ID=STATE_FADER
25-9-2021 16:37:17: AirliteCallback: Type=EVENT, ID=STATE_MODULE
25-9-2021 16:37:17: DispatchCommand: EXEC_COMMAND2 ${autoplay}|Equals(0)|PLS_CURRENT_PLAY_A
25-9-2021 16:37:17: DispatchCommand Reply: ERROR: De objectverwijzing is niet op een exemplaar van een object ingesteld.
25-9-2021 16:37:17: AirliteCallback: Type=EVENT, ID=STATE_FADER
25-9-2021 16:37:18: AirliteCallback: Type=EVENT, ID=STATE_MODULE
25-9-2021 16:37:18: DispatchCommand: EXEC_COMMAND2 ${autoplay}|Equals(0)|PLS_CURRENT_EJECTNOFADE_A
25-9-2021 16:37:18: DispatchCommand Reply: ERROR: De objectverwijzing is niet op een exemplaar van een object ingesteld.
25-9-2021 16:37:18: AirliteCallback: Type=EVENT, ID=STATE_FADER
25-9-2021 16:37:20: AirliteCallback: Type=EVENT, ID=STATE_FADER
25-9-2021 16:37:21: AirliteCallback: Type=EVENT, ID=STATE_MODULE
25-9-2021 16:37:21: DispatchCommand: EXEC_COMMAND2 ${autoplay}|Equals(0)|PLS_CURRENT_PLAY_B
25-9-2021 16:37:21: DispatchCommand Reply: ERROR: De objectverwijzing is niet op een exemplaar van een object ingesteld.
25-9-2021 16:37:21: AirliteCallback: Type=EVENT, ID=STATE_ON
25-9-2021 16:37:22: AirliteCallback: Type=EVENT, ID=STATE_MODULE
25-9-2021 16:37:22: DispatchCommand: EXEC_COMMAND2 ${autoplay}|Equals(0)|PLS_CURRENT_EJECTNOFADE_B
25-9-2021 16:37:22: DispatchCommand Reply: ERROR: De objectverwijzing is niet op een exemplaar van een object ingesteld.
25-9-2021 16:37:22: AirliteCallback: Type=EVENT, ID=STATE_ON
25-9-2021 16:37:22: AirliteCallback: Type=EVENT, ID=STATE_MODULE
25-9-2021 16:37:22: DispatchCommand: EXEC_COMMAND2 ${autoplay}|Equals(0)|PLS_CURRENT_PLAY_B
25-9-2021 16:37:22: DispatchCommand Reply: ERROR: De objectverwijzing is niet op een exemplaar van een object ingesteld.
25-9-2021 16:37:22: AirliteCallback: Type=EVENT, ID=STATE_ON
25-9-2021 16:37:23: AirliteCallback: Type=EVENT, ID=STATE_MODULE
25-9-2021 16:37:23: DispatchCommand: EXEC_COMMAND2 ${autoplay}|Equals(0)|PLS_CURRENT_EJECTNOFADE_B
25-9-2021 16:37:23: DispatchCommand Reply: ERROR: De objectverwijzing is niet op een exemplaar van een object ingesteld.
Attachments
example.png

Post Reply