GPIO Client error
-
- Posts: 24
- Joined: 30 Jul 2021 21:01
GPIO Client error
Hello when i open Propfrexx my GPIO client wont work anymore for my D&R Airlite
its connected in the GPIO client but when i put a slider up noting will play
its connected in the GPIO client but when i put a slider up noting will play
Re: GPIO Client error
What has changed since it was working last time?
Bernd - radio42
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution
Re: GPIO Client error
My client just reported the same error, with a D&R airmate, with Velleman K8055, and cannot access the backup file on the server (NAS) for restoring. Seems Propp shaked the I/O ports?
(EDIT)
He also noticed, that while Propp did the last update, Windows 10 also installed a update.
But on that PC he isn't able to reach internet and his personal intranet. Like the firewall disabled all ports...
(EDIT)
He also noticed, that while Propp did the last update, Windows 10 also installed a update.
But on that PC he isn't able to reach internet and his personal intranet. Like the firewall disabled all ports...
Last edited by GuntherM on 17 Oct 2021 12:16, edited 1 time in total.
-
- Posts: 24
- Joined: 30 Jul 2021 21:01
Re: GPIO Client error
that the Connection in the GPIO client not connecting anymore to Airlite
also Faderstarts dont work anymore
its like that the connection to airlite to the Radio software dont work
like the buttons work on the airlite only notings happen in the Radio sofware
also when in the GPIO client the D&R airlite is connected/online in the GPIO client the Airlite also dont work
Re: GPIO Client error
Note, that there are two connections:
1. Between DnR (resp. Velleman) and the GPIO client
2. Between the GPIO Client and ProppFrexx ONAIR
In the Last Screenshot above, the DnR connection is offline (eg. 1.)!
So this needs to be enabled. Can you do this and try again?!
In the main screen of the GPIO Client you can enable the Debug Logging. The log can be found in the UserAppData folder of the GPIO Client. Please post its full output here
1. Between DnR (resp. Velleman) and the GPIO client
2. Between the GPIO Client and ProppFrexx ONAIR
In the Last Screenshot above, the DnR connection is offline (eg. 1.)!
So this needs to be enabled. Can you do this and try again?!
In the main screen of the GPIO Client you can enable the Debug Logging. The log can be found in the UserAppData folder of the GPIO Client. Please post its full output here
Bernd - radio42
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution
-
- Posts: 24
- Joined: 30 Jul 2021 21:01
Re: GPIO Client error
radio42 wrote: ↑17 Oct 2021 12:25 Note, that there are two connections:
1. Between DnR (resp. Velleman) and the GPIO client
2. Between the GPIO Client and ProppFrexx ONAIR
In the Last Screenshot above, the DnR connection is offline (eg. 1.)!
So this needs to be enabled. Can you do this and try again?!
In the main screen of the GPIO Client you can enable the Debug Logging. The log can be found in the UserAppData folder of the GPIO Client. Please post its full output here
Re: GPIO Client error
Here also the same problem with my Airlite , with the last update ( premium version)
Test of D&R message mapping shows that the fader response but when i pull the fader up nothing starts
Test of D&R message mapping shows that the fader response but when i pull the fader up nothing starts
Re: GPIO Client error
There seems to have been an update issue with the latest version, e.g. your GPIO Client application was not gracefully shutdown beforehand or some components could not be updated completely. Or you installed both
The debug log reports a version of a needed Zyan.Communication.dll of 2.13.0.0 - but the correct version needs to be 2.15.0.0!
So please check or update those manually.
I have attached the correct version here:
http://www.proppfrexx.radio42.com/downl ... on.dll.zip
Else you can also re-install the latest official version...
And make sure, that all instances of ProppFrexx ONAIR and the GPIO Client use the same version.
The debug log reports a version of a needed Zyan.Communication.dll of 2.13.0.0 - but the correct version needs to be 2.15.0.0!
So please check or update those manually.
I have attached the correct version here:
http://www.proppfrexx.radio42.com/downl ... on.dll.zip
Else you can also re-install the latest official version...
And make sure, that all instances of ProppFrexx ONAIR and the GPIO Client use the same version.
Bernd - radio42
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution
ProppFrexx ONAIR - The Playout and Broadcast Automation Solution
-
- Posts: 24
- Joined: 30 Jul 2021 21:01
Re: GPIO Client error
radio42 wrote: ↑17 Oct 2021 13:29 There seems to have been an update issue with the latest version, e.g. your GPIO Client application was not gracefully shutdown beforehand or some components could not be updated completely. Or you installed both
The debug log reports a version of a needed Zyan.Communication.dll of 2.13.0.0 - but the correct version needs to be 2.15.0.0!
So please check or update those manually.
I have attached the correct version here:
http://www.proppfrexx.radio42.com/downl ... on.dll.zip
Else you can also re-install the latest official version...
And make sure, that all instances of ProppFrexx ONAIR and the GPIO Client use the same version.
where can i put this file
Re: GPIO Client error
C program files Radio42 , restart proppfrexx but no result ..kevkev2001 wrote: ↑17 Oct 2021 13:53radio42 wrote: ↑17 Oct 2021 13:29 There seems to have been an update issue with the latest version, e.g. your GPIO Client application was not gracefully shutdown beforehand or some components could not be updated completely. Or you installed both
The debug log reports a version of a needed Zyan.Communication.dll of 2.13.0.0 - but the correct version needs to be 2.15.0.0!
So please check or update those manually.
I have attached the correct version here:
http://www.proppfrexx.radio42.com/downl ... on.dll.zip
Else you can also re-install the latest official version...
And make sure, that all instances of ProppFrexx ONAIR and the GPIO Client use the same version.
where can i put this file