Serial Control Problem - PF 4.2.7.0

You found a bug or have any issues? Please post them here!
Post Reply
SevenSenses
Posts: 73
Joined: 23 Aug 2013 17:10
Location: Vienna
Contact:
Serial Control Problem - PF 4.2.7.0

Post by SevenSenses »

Hallo Bernd

Seit dem Update von 4.2.6.8 auf 4.2.7.0 funktioniert das GPIO/Remoting - Serial i/O nicht mehr.
Ich habe hier das Output auf COM3 gedreht und es ist auch ein Haken bei Serial Control Enable,
klicke ich aber auf Monitor kommt die Meldung das der Serial Server nicht gestartet ist.

Als wichtigen Hinweis!!!! Ich habe die vorherige Version 4.2.6.8 im Previous Versions Ordner
gestartet hier funktioniert alles wunderbar.


Schöne Weihnachtsgrüße aus Wien
Thomas
Serial Control Enable.jpg
Serial Server.jpg
Last edited by SevenSenses on 25 Dec 2021 17:26, edited 2 times in total.
User avatar
radio42
Site Admin
Posts: 8295
Joined: 05 Apr 2012 16:26
Location: Hamburg, Germany
Contact:
Re: Serial Control Problem - PF 4.2.7.0

Post by radio42 »

First, the v4.2.6.8 is not the previous version, but already a couple of versions back. you probably did not update in between.
There had been a v4.2.6.8, v4.2.6.9, a v4.2.6.10, a v4.2.6.12 and a v4.2.6.13 and now the v4.2.7.0.

In these versions a new Serial Binary RegEx mode added to the Serial GPIO, as well as a new Encoding option to the Serial IO configuration.
So please open the Serial IO configuration and try to set the correct encoding, e.g. 'ibm852'. And try again.

Else, I can not reproduce your issue here, as it initializes fine and is working as before.
SevenSenses
Posts: 73
Joined: 23 Aug 2013 17:10
Location: Vienna
Contact:
Re: Serial Control Problem - PF 4.2.7.0

Post by SevenSenses »

Hallo Bernd

Danke für deine schnelle Antwort.
Dank deines Tipps funktioniert alles wieder!!!!
Habe leider hier in die Einstellungen nicht reingesehen und gemerkt das es jetzt so viele Protokolle gibt. :oops:

Perfekt,danke nochmals
Schöne Weihnachtstage aus Wien.
djbony
Posts: 260
Joined: 13 May 2014 08:11
Re: Serial Control Problem - PF 4.2.7.0

Post by djbony »

I had the same problem. Everything works. Thanks for the tutorial. P.

Post Reply